LoviSil® stop-end joint
6/10 (12) kV – 18/30 (36) kVApplication
With the stop end module, a standard LoviSil® joint becomes a pot-end for cables that will be energized.
Benefits
LoviSil® stop-end joints offer a reliable solution for the end of a cable trace or when a cable trace is (partly) put out of operation.
![](https://www.lovink-enertech.com/wp-content/uploads/2018/09/opbouw-buitenschaal.png)
The joint construction of outer shells, polyurethane resin and LoviSil® offers superb protection against moisture and polluted soil.
![](https://www.lovink-enertech.com/wp-content/uploads/2018/09/efficiente-montage.png)
Uniform build up, pre-installed parts offering efficient installation. Only standard tools and no shrinking or soldering.
![](https://www.lovink-enertech.com/wp-content/uploads/2018/09/kabelconfiguraties.png)
One basic concept for all cable configurations. A modular system (base-, cable- and resin module) offers stock cost advantages.
![](https://www.lovink-enertech.com/wp-content/uploads/2018/09/elektrische-isolatie.png)
LoviSil® guarantees a reliable electrical insulation and is extremely suitable for future grids.
![](https://www.lovink-enertech.com/wp-content/uploads/2024/04/PROMO_R_END-e1715610816651.png)